Fellow ODE Brew Grinder V2: Black

ODE Brew Grinder GEN 2

FREE Grind Card with every grinder!

Developed over two years, this is the next generation of the award-winning home brew grinder. Your coffee will never be the same again, whether it's the finest pour-over or the coarsest cold brew.

Ingeniously designed by Fellow's Vice President of Research and Development and Certified Q Grader, Gen 2 Brew Burrs grind finer and with greater precision. With the exception of espresso, the broader grind range is exceptional for all brew methods. An expanded 100 gram catch cup for batch brews, as well as anti-static technology for less grind mess, make this the next generation of grinding.

Whats in the box?

• 1 x Fellow ODE Brew Grinder GEN 2

Specifications

• Usage: Ode was designed for brewed coffee methods (AeroPress®, pour-over, electric coffee makers, French press, cold brew, and more) only. Ode does not grind for espresso.
• Dimensions: 239 mm x 105 mm x 248.3 mm
• Weight: 4.6 kg/10.14 lbs
• Grinds capacity: 100 g
• Cord length: 1 m
• Materials: Aluminum body, plastic load bin and base, stainless steel burrs

Features

• New best-in-class Gen 2 Brew Burrs
• New anti-static technology for less grind mess
• New 100 gram capacity
• New load bin design for smoother bean feeding
• 31 grind settings and guide
• Quiet grinding and automatic stop
• Single dose loading for maximum freshness
• Low grind retention
• Magnetically aligned catch with easy pour fins
• Grinds knocker
• Compact footprint

Installing SSP Blades:

To replace the stock brew burrs in Ode with the proper SSP burrs, follow the steps laid out in our "How to replace the burrs" video. It is crucial that you adjust your grinder to setting 11 before the installation process. Also, you must thoroughly clean out your grinder with a brush before installing new burrs to ensure the alignment is correct. If you have a keyboard duster or a shop vacuum available, even better. Once these SSP burrs are installed, you need to calibrate your grinder before grinding coffee. 

Calibration

Please note "How to calibrate your Ode" video shows how to recalibrate the stock brew burrs, so you will need to modify this procedure to calibrate your SSP burrs. Follow the steps from the video laid out below, .

• Unplug Ode
• Turn grind dial to setting 11 (do not adjust to setting 1 as instructed in the video) If you do not follow this step, the burrs will jam when you turn on the motor.
• Pull gently on the faceplate to remove
• Remove the four M3 screws surrounding the dial
• Pull to remove grind dial to reveal calibration dial
• Plug Ode back in
• Press power button
• Slowly turn the calibration dial counterclockwise
• When you hear the burrs chirping, stop here.
• Adjust the grinder 5 clicks in the other direction (clockwise) and turn it off.
• Unplug Ode
• Make sure the grind dial is positioned at setting 1 (rotated all the way to the left)
• Carefully put the grind dial back in place (do not twist calibration dial while reinstalling)
• Replace the four M3 screws
• Press gently to snap on the faceplate
• Plugin Ode and press power button with no coffee inside
• You should not hear chirping or click noise at setting 1
• Grind coffee and enjoy!
• Note: It will take roughly 5-10 lbs of coffee to season these SSP burrs, so don't be alarmed if your standard grind setting adjusts within the first 3-6 months of use. *Using these burrs in Ode to brew espresso will void the warranty. Using any other SSP variant or 3rd party burrs in Ode will also void the warranty. Please reach out to us before you buy 3rd party burrs and/or start the installation process if you have any questions or concerns.

A how-to guide to replacing your 64 mm flat burrs on your Ode Brew Grinder.