SSP Red Speed 83mm Burrs/Blades to fit Mazzer Major

SSP Red Speed 83mm Burrs/Blades to fit Mazzer Major

Boost the speed of your Mazzer without compromising on quality by using this state of the art custom burr geometry by SSP Grinding Solutions. Noticeably the grinding is faster and much cooler than the original burr thanks to this customised geometry coated with red speed TiAICN Titanium Aluminium carbon Nitride has many advantages on the burr and the ground coffee

What's in the box?

• 1 x Set SSP Red Speed 83mm Burrs/Blades to fit Mazzer Major

About S.S.P

Family owned and operated since 1991, SSP Grinding Solution began as one of the early manufacturers of grinding tools in South KOREA. Today, SSp continues to be a leader in offering an every flat coffee grinding line of high quality cutting tools such as new customized burr sets, and other high performance and specialty tools.

Features

• 83mm
• Protection for the burr geometry
• Low coefficient of heat propagation
• Higher cutting forces
• Improved surface of the burr
• Reduce tendency for cracks
• 5+ tones of coffee

Installation procedure of SSP coffee grinder burr set.

• Dismount the old burr set following the original grinder manufacturer's instructions,
• Clean the inside of grinder by vacuum or brush for proper alignment of new burrs. Coffee powder or any dirties can cause stalling problem and bad alignment after installation.
• Check back side of new SSP burr set (Top / Bottom or Inside/ Outside] for proper installation.
• SSP recommends 3-5 kg course range coffee grinding as 'Seasoning period'. Until the edges of the burr are fully covered with coffee oil, grinding speed may be slower than normal. SSP recommends grind full city or French roasted bean for 'Seasoning period'.
• It is recommended to be very careful while using espresso setting as it may cause damage to the grinder.