| BLACK FRIDAY SALE NOW ON | SECURE PAYMENT     AUSTRALIAN STOCK     TRACEABLE ORDERS

Mazzer

Blades/burrs conical 71mm right hand (rh) - Mazzer Robur original 186C

Item Number: 620372

Blades/burrs conical 71mm right hand (rh) - Mazzer Robur original
  • Blades/burrs conical 71mm right hand (rh) - Mazzer Robur original
RRP $339.95 Save $20.95 Your Price $319
4 payments of $79.75
ZipMoney Logo
Own it now, pay later

Out of stock

Categories: Spare Parts
Shipping Estimate

Need Help? Contact Us

Description

Blades/burrs conical 71mm right hand (rh) - Mazzer Robur original 186C

Blades/burrs conical 71mm right hand (rh) - Mazzer Robur original

  • In order to maintain the coffee grinder's performance quality, we recommend replacing the burrs once the following consumption levels have been reached. - 800kg - 1000kg

After changing the burrs, how do I find the grinding point? - ROBUR - Espresso at approx. 7 numbers from the millstones contact point

Did I replace the burrs correctly? - Once the burrs have been changed, to check that the operation has been carried out correctly and to make sure of the correct parallelism, it is recommended to open the ring nut only 5 notches from the burrs contact point (always found with the engine stopped) and grind 5 / 6 gr of coffee: what comes out should be similar to talc, a very fine and homogeneous particulate (be careful not to grind too much coffee with this setting point due to the risk of clogging millstones). After this check, the appliance can be adjusted to the expressed particle size. Setpoint. Adjustment table

Maintenance - After assembling the new grinders, it is advisable to clean the thread and counter-thread of the adjusting ring well, apply food grade grease to the thread and try to screw the ring nut without the upper grinder holder until the end of the stroke, so as to distribute the lubricant and make sure that it flows correctly of the piece. Once this is done, it will be possible to try the upper grinder holder and ring nut assembly. Make sure that all the springs are in place before closing the appliance.

After Replacing - Before adjusting the grain size after cleaning the appliance, make sure that the grinding chamber and the duct are completely filled with coffee: only in this condition is the grain size actually corresponding to that point of the adjustment obtained. The first doses ground in an empty chamber will be characterized by a significantly larger particulate than will be obtained with the appliance at full capacity.

The First grinds after burr change - At each change of burrs, grind a few doses of coffee. Do not use these first doses of ground coffee for brewing coffee.

Specifications
Brand Mazzer
Warranty 1 Year
Returns 14 Days Change of Mind
Burr Type Conical
Shipping & Returns

Delivery Time and Costs

Parts, Accessories, Brew Bar and Tea Bar

standard delivery

From $8.95  2 – 7 business days*

express delivery

From $9.95  1 – 3 business days*
Water Filters

standard delivery

From $8.95  2 – 7 business days*

express delivery

From $9.95  1 – 3 business days*
Coffee Grinders

Home Grinders

Use estimator  1 – 3 business days*

Commercial Grinders

Use estimator  1 – 3 business days*
Coffee Machines

Home Machines

Use estimator  1 – 4 business days*

Commercial Machines

Use estimator  2 – 7 business days*

 

Freight Partners

Within Australia

Australia Post

TNT Couriers

Same Day

Capital Transport

Civic Couriers

 

We use Australia Post eParcel as well as various Couriers to dispatch all orders both within Australia and Internationally. If you are in Sydney you will also be able to select from same day 3 hour couriers, or click and collect from our warehouse in Pagewood just 10 minutes from Sydney CBD.

Shipping cost will depend on the size of your order and location, however you can check costs both directly on the product page or at checkout prior to entering any details.

Orders placed before 2pm AEST will be despatched on the same working day, and both Australia Post and the couriers we use deliver parcels Monday to Friday, generally between the hours of 8am to 6pm. On most items during checkout you will be able to select between standard and express delivery, however quoted delivery timeframes are indicative only.

For more shipping information please review our shipping and delivery page.

Warranty

All our stock is 'Australian Delivered' as such covered by Australian Warranty which in most cases is manufacturer backed. The warranty does not apply to international orders being sent outside Australia, as such any warranty claim would need to be returned back to Australia for assessment.

Easy Returns

Returns are generally allowed within 14 days of purchase for most spare parts, accessories and brew gear, however some exclusions apply. If you have made your purchase using an eligible PayPal account, you may be eligible to have PayPal refund your shipping costs. For full returns policy please read our returns policy.

YOUR MACHINE ALSO WANTS



Blades/burrs conical 71mm right hand (rh) - Mazzer Robur original

  • In order to maintain the coffee grinder's performance quality, we recommend replacing the burrs once the following consumption levels have been reached. - 800kg - 1000kg

After changing the burrs, how do I find the grinding point? - ROBUR - Espresso at approx. 7 numbers from the millstones contact point

Did I replace the burrs correctly? - Once the burrs have been changed, to check that the operation has been carried out correctly and to make sure of the correct parallelism, it is recommended to open the ring nut only 5 notches from the burrs contact point (always found with the engine stopped) and grind 5 / 6 gr of coffee: what comes out should be similar to talc, a very fine and homogeneous particulate (be careful not to grind too much coffee with this setting point due to the risk of clogging millstones). After this check, the appliance can be adjusted to the expressed particle size. Setpoint. Adjustment table

Maintenance - After assembling the new grinders, it is advisable to clean the thread and counter-thread of the adjusting ring well, apply food grade grease to the thread and try to screw the ring nut without the upper grinder holder until the end of the stroke, so as to distribute the lubricant and make sure that it flows correctly of the piece. Once this is done, it will be possible to try the upper grinder holder and ring nut assembly. Make sure that all the springs are in place before closing the appliance.

After Replacing - Before adjusting the grain size after cleaning the appliance, make sure that the grinding chamber and the duct are completely filled with coffee: only in this condition is the grain size actually corresponding to that point of the adjustment obtained. The first doses ground in an empty chamber will be characterized by a significantly larger particulate than will be obtained with the appliance at full capacity.

The First grinds after burr change - At each change of burrs, grind a few doses of coffee. Do not use these first doses of ground coffee for brewing coffee.